The installation tool consists of
the following components:
The operating Lever is rotated to
open and close the Light bridge fiber clamp and to eject the Light bridge
splice from the splice retainer.
The Light bridge splice retainer
holds the Light bridge splice securely in the installation tool during the
splicing operation.
The fiber clamps hold the fibers
in place during the splicing operation, or when reopening the Light bridge
splice.
The ejectors push the Light bridge
splice up and out of the retainer when the operating lever is rotated all the
way to the back of the unit and down.
The fiber guides, on either side of the splice retainer,
help to channel the bare fibers into the Light bridge splice’s v-groove.
No comments:
Post a Comment